Fireflex wholesaler





Enforcer

FIREFLEX ENFORCER SUSPENSION

SOME SUSPENSION FACTS!


Shock absorbers are designed to work with the spring system of a vehicle as one inseparable unit. It is actually the spring system which absorbs bump shock forces during suspension movement. The spring not only move upwards, during shock force, but downwards and it can take some time for a spring in motion to return to its' neutral position.

Shock absorbers are meant to slow and control spring oscillation travel and allow the wheels to mantain good road contact, which improve balance of steering, road stability and cornering reliability. Hence, suspension plays a vital role in the handling, comfort and safely of a vehicle.


MORE INFO


ALL SPRING LEAVES ARE SHOT PEENED:

This method assists in reducing the surface decarburization of the material and increases the fatigue life durability of the spring.

ALL SPRING ARE SCRAGGED (PRE-STRESSES):

This is to reduce initial tension stress, improving the fatigue life of the springs.

ALL LEAVES HAVE PROTECTIVE GRAPHITE COATING:

The primary purpose is to prevent friction and corrosion, improving the life of the spring.

ALL SPRINGS HAVE BOLT TYPE ALIGNMENT CLIPS:

These limit the sideways spread and vertical separation of the individual leaves.

ALL LEAVES GHAVE DIAMOND POINT FOR SPEARED ENDS:

This allows better distribution of pressure between the leaves more effectively. Thus reducing inter leaf friction.

ALL COIL SPRING ARE POWDER COATED:

This is to reduce the initial tension stress, in proving the fatigue life of the spring.

HEAVY DUTY HIGH LIFT DESIGN:

The spring have been redesigned to raise the vehicle 40-50 mm above the standard original height (depending upon what accessories are fitted), and to improve the overall, handling and load carrying capacity of the vehicle.

WARRANTY:

All Fireflex 4WD Leaf Springs carry a 12 month Australia-wide, unlimited kilometre warranty against materials failure or breakage under conditions of normal use. All 4WD Coil Springs carry a 5 year Australia-wide warranty against material failure or breakage under conditions of normal use.

LOW PRESSURE NITROGEN GAS CHARGED:

To provide immediate response, and to maximise fade resistance.

LARGE INNER BULGE CYLINDER:

This provides extra oil capacity for improved heat displacement, allowing the shock to run cooler, and respond better over a wider range of surface.

LARGE PRECISION GROUND CHROME HARDENED PISTON ROD:

Resists nicks and scratches giving longer life to the piston red and seals.

LONG LIFE, LOW FRICTION PISTON ROD GUIDES & SEALS:

Ensures that the shock absorber retains the oil & gas under harsh and hot operating conditions.

LONG TRAVEL DESIGN:

Gives greater wheel travel and improved chassis ground clearance in harsh terrain.

DOUBLE ACTION MULTI-STAGED VALVING:

Responds immediately to any varying degree of dampening or rebound action during spring oscillation.

REINFORCED ARC WELDING:

This is on both pin and eye mounts to improve the life of the shock absorber.

TWIN TUBE DESIGN:

This gives greater protection to working parts.

OUTER STEEL DUST < STONE COVER:

For extra protection against the outs' de elements, and improves the life of the shock absorber.

QUALITY ASSURED PRODUCT:

All shock absorbers are designed and manufactured by a renowned international manufacturer, to the stringent international Quality Approved Standard ISO9001.

WARRANTY:

All fireflex shock absorbers carry a 2 year / 40.000 km warranty against materials failure or breakage under conditions of normal use. Fireflex Suspensions products are fully guaranteed and are available from Fireflex 4WD Suspension Specialist Australia wide.


COMPLETE RANGE OF SUSPENSION COMPONENTRY AVAILABLE:

LEAF SPRINGS
COIL SPRINGS
TORSION BARS
SHOCK ABSORBERS
U-BOLTS
SHACKLES & PINS (Greasable & non-greasable)
SHACKLE BUSHES